Are estimates really free?
Yes. Call 931.316.8808 to set up a visit. We look at the surfaces in person, because condition and prep needs drive the price far more than square footage does, and you get a price before any work is scheduled.
Do you paint new construction?
Yes. We paint and stain new construction and additions for builders and homeowners, as well as older homes. On new work the prep is mostly priming where needed, filling nail holes with the right material, caulking joints and applying clean finish coats. Call 931.316.8808 to talk through scope and timing.
What areas do you serve?
Cookeville and the Upper Cumberland region of Tennessee, including Sparta, McMinnville and Smithville, with work extending toward Murfreesboro and Nashville. Call to confirm your location.
What does surface preparation include?
It depends on the surface, and on whether the home is new or older. Older exteriors are washed, loose paint is scraped and sanded, bare areas are primed and joints are re-caulked. On new construction the focus is caulking, priming where needed and clean finish coats. Interiors get nail holes and small dings patched with the right material, stains primed and trim joints caulked. Logs and decks are cleaned, and failed finishes are removed before new stain is applied.
Do you roll or spray the paint?
Either. Tell us your preference at the estimate. If you do not have one, we choose the method that gives the best finish for that surface and job.
How long will my project take?
A few rooms may take only a few days. A full exterior, a deck or a log home restoration takes longer and depends on the amount of prep and on the weather. You will get an expected timeline with your estimate.
How often does a log home need to be re-stained?
Most log homes need a maintenance coat every three to five years, though it varies with the product, sun exposure and how well the previous finish was applied. South and west walls usually weather first. A simple check is to spray the logs with water: if it soaks in and darkens the wood instead of beading, the finish is due.
How often should I re-stain my deck?
Deck boards typically need attention every two to three years, since horizontal surfaces hold water and take direct sun. Railings and other vertical parts usually last longer. Keeping up with maintenance coats avoids the cost of stripping and starting over.
Can Hardie or fiber cement siding be repainted?
Yes, and it takes paint very well. The surface needs to be cleaned of chalk and mildew, the caulk at joints and trim checked and renewed, and a quality exterior acrylic applied. It is also a good opportunity to change color.
My new Hardie siding came with a khaki or tan colored side. Is that primed?
Yes, most likely. Primed James Hardie siding ships from the factory with a beige or khaki primer coat, which is why it can look unfinished or a bit drab. It is ready to paint, but primer is not a finish: it is not meant to face the weather for long and needs to be topcoated with a quality exterior acrylic, ideally within about six months of installation. Cut ends and any spots scuffed during install should get touched up with primer before the finish coats. Siding with a factory color finish (Hardie ColorPlus) is a different product and does not need painting.
What is the best time of year for exterior painting in Tennessee?
Spring through fall, with early fall often giving the most reliable stretch of mild, dry days. Paint and stain need suitable temperatures and a dry surface to cure, so winter is usually reserved for interior work.
What happens if it rains during my exterior project?
Exterior work is scheduled around the forecast. Paint and stain are not applied to wet surfaces or when rain is expected before the coating can dry, so a wet week may push the schedule back. We will keep you informed.
What should I do to get ready for interior painting?
Taking down wall hangings and moving small or fragile items out of the room is a big help. We will talk through furniture and room access at the estimate, and floors and remaining furnishings are protected before work begins.
Can you help me choose a paint color or stain?
Yes. Bring it up at the estimate. Sheen, color and product all affect how a finish looks and how long it lasts, and it is worth seeing samples on your actual siding, logs or walls before committing.
Should I repaint or just touch up?
Touch-ups work when the existing paint is sound and fairly recent. If the finish is faded, chalky or peeling in several places, touched-up spots tend to stand out, and a full repaint is the better value. We can tell you which applies when we see it.